跳转到内容

圓密耳

本页使用了标题或全文手工转换
维基百科,自由的百科全书
圓密耳
单位制英制單位
物理量名称面積
符号cmil 
單位換算
1 cmil相当于
   SI制   0.0000000005067075 m2
   英制/美制單位   0.00000000545415413747 sq ft

圓密耳(英文:circular mil)是一種面積單位,又稱圓密爾,等於一個直徑爲 1 密耳(千分之一英寸)的圓的面積,相當於5.067×10−4 mm2。這個單位的制定和具有圓形截面電線有關,使用這個單位可以避開圓周率的計算,這使得橫截面積和其直徑的對應轉換變得十分容易。

美國加拿大使用的美國國家電氣規範英语National Electrical Code(National Electrical Code, NEC)中使用圓密耳定義比4/0 AWG(直徑0.46英寸,即11.684mm的電線)粗的導線尺寸。粗電纜通常使用千圓密耳作單位,有MCMkcmil兩種縮寫方式。除了北美及中美洲,日本南韓台灣均採用等效於NEC的電氣規範。世界上其他國家均採用国际电工委员会(IEC)標準,以mm2為單位,標準值採用IEC 60228

  • 1 圓密耳 = π/4 方密耳 ≈ 0.785398 方密耳
  • 1 方密耳 = 4/π 圓密耳 ≈ 1.273240 圓密耳

標準尺寸

[编辑]

美國國家電工標準(NEC)的電線標準中,250至400MCM,每級增大50MCM,400至1000時,每級增大100,1000至2000時,每級增大250。[1]

下表展示的直徑基於實心導體計算。如果採用絞合導體,直徑則會較大,視乎使用多少根幼導線緊壓成一條電纜。

國家電工標準(NEC)
截面體 直徑 銅線載流量 (A)
60/75/90 °C
導體溫度[2]
(kcmil,
MCM)
(mm2) (in) (mm)
250 126.7 0.500 12.70 215 255 290
300 152.0 0.548 13.91 240 285 320
350 177.3 0.592 15.03 260 310 350
400 202.7 0.632 16.06 280 335 380
500 253.4 0.707 17.96 320 380 430
600 304.0 0.775 19.67 355 420 475
700 354.7 0.837 21.25 385 460 520
750 380.0 0.866 22.00 400 475 535
800 405.4 0.894 22.72 410 490 555
900 456.0 0.949 24.10 435 520 585
1000 506.7 1.000 25.40 455 545 615
1250 633.4 1.118 28.40 495 590 665
1500 760.1 1.225 31.11 520 625 705
1750 886.7 1.323 33.60 545 650 735
2000 1013.4 1.414 35.92 560 665 750

其他較細的電線採用美国线规(AWG)。

參考資料

[编辑]
  1. ^ NFPA 70-2011 National Electrical Code 2011 Edition 互联网档案馆存檔,存档日期2008-10-15.. Table 310.15(B)(17) page 70-155, Allowable Ampacities of Single-Insulated Conductors Rated Up to and Including 2000 Volts in Free Air, Based on Ambient Air Temperature of 30°C (86°F).
  2. ^ NFPA 70 National Electrical Code 2008 Edition 互联网档案馆存檔,存档日期2008-10-15.. Table 310.16 page 70-148, Allowable ampacities of insulated conductors rated 0 through 2000 volts, 60°C through 90°C, not more than three current-carrying conductors in raceway, cable, or earth (directly buried) based on ambient temperature of 30°C. Extracts from NFPA 70 do not represent the full position of NFPA and the original complete Code must be consulted. In particular, the maximum permissible overcurrent protection devices may set a lower limit.