跳转到内容

模板:Infobox connector/doc

维基百科,自由的百科全书

Template:Infobox connector is an infobox for electrical and (audio/video) signal connectors of all kinds.

The template supports three images:

  • image, logo, pinout_image

Image and logo share a 300 pixel wide area - so if both are used then the width of the image should be set to 150 pixels, that is, [[Image:example.jpg|150px]]. If only image and pinout are used, then the size of both should be 300 pixels.

Usage

[编辑]
{{Infobox connector
| name =
| logo =
| image =
| caption =
| type =
| designer =
| design_date =
| manufacturer =
| production_date =
| superseded =
| superseded_by =
| superseded_by_date =
| weight =
| length =
| width =
| height =
| diameter =
| num_pins =
| hotplug =
| daisy_chain =
| external =
| audio_signal =
| video_signal =
| cable =
| passband =
| physical_connector =
| electrical =
| earth =
| maximum_voltage =
| maximum_current =
| data_signal =
| data_bit_width =
| data_bandwidth =
| data_devices =
| data_style =
| pinout_image =
| pin1 =
| pin1_name =
| shell =
| hooks =
| pin_custom1 =
| pin_custom1_name =
| pinout_caption =
| pinout_image2 =
| pinout_caption2 =
| pinout_col1_name =
| pinout_col2_name =
| pin2_name =
| pin2 =
| pin3_name =
| pin3 =
| pin4_name =
| pin4 =
| pin5_name =
| pin5 =
| pin6_name =
| pin6 =
| pin7_name =
| pin7 =
| pin8_name =
| pin8 =
| pin9_name =
| pin9 =
| pin10_name =
| pin10 =
| pin11_name =
| pin11 =
| pin12_name =
| pin12 =
| pin13_name =
| pin13 =
| pin14_name =
| pin14 =
| pin15_name =
| pin15 =
| pin16_name =
| pin16 =
| pin17_name =
| pin17 =
| pin18_name =
| pin18 =
| pin19_name =
| pin19 =
| pin20_name =
| pin20 =
| pin21_name =
| pin21 =
| pin22_name =
| pin22 =
| pin23_name =
| pin23 =
| pin24_name =
| pin24 =
| pin25_name =
| pin25 =
| pin26_name =
| pin26 =
| pin27_name =
| pin27 =
| pin28_name =
| pin28 =
| pin29_name =
| pin29 =
| pin30_name =
| pin30 =
| pin31_name =
| pin31 =
| pin32_name =
| pin32 =
| pin33_name =
| pin33 =
| pin34_name =
| pin34 =
| pin35_name =
| pin35 =
| pin36_name =
| pin36 =
| pin37_name =
| pin37 =
| pin38_name =
| pin38 =
| pin39_name =
| pin39 =
| pin40_name =
| pin40 =
| pin_name_custom1 =
| pin_custom2_name =
| pin_name_custom2 =
| pin_custom2 =
| pin_custom3_name =
| pin_name_custom3 =
| pin_custom3 =
| pin_custom4_name =
| pin_name_custom4 =
| pin_custom4 =
| pin_custom5_name =
| pin_name_custom5 =
| pin_custom5 =
| pin_custom6_name =
| pin_name_custom6 =
| pin_custom6 =
| pin_custom7_name =
| pin_name_custom7 =
| pin_custom7 =
| pin_custom8_name =
| pin_name_custom8 =
| pin_custom8 =
| pinout_notes =
}}

例子

[编辑]
D4 Video connector
This example is not factual – it is purely illustrative of the infobox.
类别 Analogue video connector
产品历史
设计者 Some guy
设计时间 Early 1990s
制造商 Initially Toshiba
制造时间 Early 1990s to 2005
前身 RF connector
取代 DVI connector (2005)
一般规格
长度 36 mm (typical)
宽度 25 mm
高度 6.5 mm
热插拔 Yes
外接 External
音频信号 None
视频信号 Analogue 480i, 480p, 720p, 1080i
缆线 14 core shielded (25 m max)
通带 0–20 GHz
引脚 14 (6 video, 3 reserved, 2 detect, 3 data)
连接器 DB-25
电力
信号 220 volts AC 50 Hz typically
接地 Dedicate pin
最大电压 450 volts peak
最大电流 20 amps at 220 volts, 5 amps at 400 volts
数据
数据信号 Resolution and Aspect ratio only
宽度 2 bits
比特率 120 bit/s
最多设备数 1
协议 Serial
引脚输出
A male connector seen from the front.
引脚 Spec name Example col title
引脚1 Y luminance (0.7 V, 75 Ω)
引脚2 Y GND Y ground
引脚3 Pb 0.35 V, 75 Ω
引脚4 Pb GND
引脚5 Pr 0.35 V, 75 Ω
引脚6 Pr GND
引脚7 Reserve link 1
引脚8 Data line 1 0 V = 525 lines
2.2 V = 750 lines
5 V = 1125 lines
引脚9 Data line 2 0 V = 59.94i / 60i
5 V = 59.94p / 60p
引脚10 Reserve link 2
引脚11 Data line 3 0 V = 4:3
2.2 V = 4:3 letterbox
5 V = 16:9
引脚12 Plug insert detect ground
引脚13 Reserve link 3
引脚14 Plug insert detect output 10 kΩ, input > 100 kΩ
C1 BLUE Analog Blue Video
C2 GREEN Analog Green Video
C3 HA_SYNC Analog Horizontal Sync
C4 RED Analog Red Video
C5 RETURN Analog RGB Return and DDC Return
C6 AR_PRE Acid reflux preventer
C7 AR_ENC Acid reflux encourager
C8 CHRO Churro presence detect
These are some notes about the pinout of this connector. The pins are razor sharp.
{{Infobox connector
| name = D4 Video connector
| image = [[File:SCART 20050724 002.jpg|150px]]
| logo = [[File:D4 connector.png|150px]]
| caption = This example is not factual – it is purely illustrative of the infobox.
| type = [[analog electronics|Analogue]] video connector
| designer = Some guy
| design_date = Early 1990s
| manufacturer = Initially [[Toshiba]]
| production_date = Early 1990s to 2005
| superseded = [[RF connector]]
| superseded_by = [[DVI connector]]
| superseded_by_date = 2005
| external = External
| hotplug = Yes
| length = 36 mm (typical)
| width = 25 mm
| height = 6.5 mm
| electrical = 220 volts AC 50 Hz typically
| earth = Dedicate pin
| maximum_voltage = 450 volts peak
| maximum_current = 20 amps at 220 volts, 5 amps at 400 volts
| audio_signal = None
| video_signal = [[analog signal|Analogue]] [[480i]], [[480p]], [[720p]], [[1080i]]
| data_signal = Resolution and [[Aspect ratio]] only
| data_bit_width = 2 bits
| data_bandwidth = 120 bit/s
| data_devices = 1
| data_style = [[Serial communications|Serial]]
| physical_connector = DB-25
| cable = 14 core shielded (25 m max)
| passband = 0–20 GHz
| num_pins = 14 (6 video, 3 reserved, 2 detect, 3 data)
| pinout_image = [[File:D4 connector.png|300px]]
| pinout_caption = A male connector seen from the front.
| pinout_col1_name = Spec name
| pinout_col2_name = Example col title
| pin1 = [[Luminance (video)|luminance]] (0.7 V, 75 Ω)
| pin1_name = Y
| pin2 = Y [[Ground (electricity)|ground]]
| pin2_name = Y GND
| pin3 = 0.35 V, 75 Ω
| pin3_name = Pb
| pin4 = 
| pin4_name = Pb GND
| pin5 = 0.35 V, 75 Ω
| pin5_name = Pr
| pin6 = 
| pin6_name = Pr GND
| pin7 = Reserve link 1
| pin7_name = 
| pin8 = 0 V = 525 lines<br /> 2.2 V = 750 lines<br /> 5 V = 1125 lines
| pin8_name = Data line 1
| pin9 = 0 V = 59.94i / 60i<br /> 5 V = 59.94p / 60p
| pin9_name = Data line 2
| pin10 = Reserve link 2
| pin10_name = 
| pin11 = 0 V = 4:3 <br /> 2.2 V = 4:3 letterbox <br /> 5 V = 16:9
| pin11_name = Data line 3
| pin12 = 
| pin12_name = Plug insert detect ground
| pin13 = Reserve link 3
| pin13_name = 
| pin14 = output 10 kΩ, input > 100 kΩ
| pin14_name = Plug insert detect
| pin_custom1_name = C1
| pin_name_custom1 = BLUE
| pin_custom1 = Analog Blue Video
| pin_custom2_name = C2
| pin_name_custom2 = GREEN
| pin_custom2 = Analog Green Video
| pin_custom3_name = C3
| pin_name_custom3 = HA_SYNC
| pin_custom3 = Analog Horizontal Sync
| pin_custom4_name = C4
| pin_name_custom4 = RED
| pin_custom4 = Analog Red Video
| pin_custom5_name = C5
| pin_name_custom5 = RETURN
| pin_custom5 = Analog RGB Return and DDC Return
| pin_custom6_name = C6
| pin_name_custom6 = AR_PRE
| pin_custom6 = [[Acid reflux]] preventer
| pin_custom7_name = C7
| pin_name_custom7 = AR_ENC
| pin_custom7 = Acid reflux encourager
| pin_custom8_name = C8
| pin_name_custom8 = CHRO
| pin_custom8 = Churro presence detect
| pinout_notes = These are some notes about the pinout of this connector. The pins are razor sharp.
}}

追踪分类

[编辑]