跳转到内容

用户:CCF BS/SandBox1

典范条目
维基百科,自由的百科全书

Extrusion billets of aluminium piled up before a factory
Extrusion billets of aluminium

Aluminium (or aluminum) metal is very rare in native form, and the process to refine it from ores is complex, so for most of human history it was unknown. However, the compound alum has been known since the 5th century BCE and was used extensively by the ancients for dyeing. During the Middle Ages, its use for dyeing made it a commodity of international commerce. Renaissance scientists believed alum was a salt of a new earth; during the Age of Enlightenment, it was established that this earth, alumina, was an oxide of a new metal. Discovery of this metal was announced in 1825 by Danish physicist Hans Christian Ørsted, whose work was extended by German chemist Friedrich Wöhler.

Aluminium was difficult to refine and thus uncommon in actual usage. Soon after its discovery, the price of aluminium exceeded that of gold. It was only reduced after the initiation of the first industrial production by French chemist Henri Étienne Sainte-Claire Deville in 1856. Aluminium became much more available to the public with the Hall–Héroult process developed independently by French engineer Paul Héroult and American engineer Charles Martin Hall in 1886, and the Bayer process developed by Austrian chemist Carl Joseph Bayer in 1889. These processes have been used for aluminium production up to the present.

The introduction of these methods for the mass production of aluminium led to extensive use of the light, corrosion-resistant metal in industry and everyday life. Aluminium began to be used in engineering and construction. In World Wars I and II, aluminium was a crucial strategic resource for aviation. World production of the metal grew from 6,800 metric tons in 1900 to 2,810,000 metric tons in 1954, when aluminium became the most produced non-ferrous metal, surpassing copper.

In the second half of the 20th century, aluminium gained usage in transportation and packaging. Aluminium production became a source of concern due to its effect on the environment, and aluminium recycling gained ground. The metal became an exchange commodity in the 1970s. Production began to shift from the developed countries to the developing ones; by 2010, China had accumulated an especially large share in both production and consumption of aluminium. World production continued to rise, reaching 58,500,000 metric tons in 2015. Aluminium production exceeds those of all other non-ferrous metals combined.

Early history

[编辑]

Today, I bring you the victory over the Turk. Every year they wring from the Christians more than three hundred thousand ducats for the alum with which we dye wool. For this is not found among the Latins except a very small quantity. [...] But I have found seven mountains so rich in this material that they could supply seven worlds. If you will give orders to engage workmen, build furnaces, and smelt the ore, you will provide all Europe with alum and the Turk will lose all his profits. Instead they will accrue to you ...

——Giovanni da Castro to his godfather Pope Pius II in 1461, after discovering a rich source of alum at Tolfa near Rome[1]
White crystals of alum on a glass-like plate
Crystals of alum, the naturally occurring form of which was known back to the ancients

The history of aluminium was shaped by the usage of its compound alum. The first written record of alum was in the 5th century BCE by Greek historian Herodotus.[2] The ancients used it as a dyeing mordant, in medicine, in chemical milling, and as a fire-resistant coating for wood to protect fortresses from enemy arson.[3] Aluminium metal was unknown. Roman writer Petronius mentioned in his novel Satyricon that an unusual glass had been presented to the emperor: after it was thrown on the pavement, it did not break but only deformed. It was returned to its former shape using a hammer. After learning from the inventor that nobody else knew how to produce this material, the emperor had the inventor executed so that it did not diminish the price of gold.[4] Variations of this story were mentioned briefly in Natural History by Roman historian Pliny the Elder (who noted the story had "been current through frequent repetition rather than authentic")[5] and Roman History by Roman historian Cassius Dio.[4] Some sources suggest this glass could be aluminium.[a][b] It is possible aluminium-containing alloys were produced in China during the reign of the first Jin dynasty (265–420).[c]

After the Crusades, alum was a commodity of international commerce;[9] it was indispensable in the European fabric industry.[10] Small alum mines were worked in Catholic Europe but most alum came from the Middle East.[11] Alum continued to be traded through the Mediterranean Sea until the mid-15th century, when the Ottomans greatly increased export taxes. In a few years, alum was discovered in great abundance in Italy. Pope Pius II forbade all imports from the east, using the profits from the alum trade to start a war with the Ottomans.[1] This newly found alum long played an important role in European pharmacy, but the high prices set by the papal government eventually made other states start their own production; large-scale alum mining came to other regions of Europe in the 16th century.[12]

Establishing the nature of alum

[编辑]

I think it not too venturesome to predict that a day will come when the metallic nature of the base of alum will be incontestably proven.

——French chemist Théodore Baron d'Hénouville in 1760 at the Paris Academy of Sciences[13]
Portrait of Antoine Lavoisier in a laboratory
Antoine Lavoisier established that alumina was an oxide of an unknown metal.

At the start of the Renaissance, the nature of alum remained unknown. Around 1530, Swiss physician Paracelsus recognized alum as separate from vitriole (sulfates) and suggested it was a salt of an earth.[14] In 1595, German doctor and chemist Andreas Libavius demonstrated alum and green and blue vitriole were formed by the same acid but different earths;[15] for the undiscovered earth that formed alum, he proposed the name "alumina".[14] German chemist Georg Ernst Stahl stated the unknown base of alum was akin to lime or chalk in 1702; this mistaken view was shared by many scientists for half a century.[16] In 1722, German chemist Friedrich Hoffmann suggested the base of alum was a distinct earth.[16] In 1728, French chemist Étienne Geoffroy Saint-Hilaire claimed alum was formed by an unknown earth and sulfuric acid;[16] he mistakenly believed burning that earth yielded silica.[17] (Geoffroy's mistake was only corrected in 1785 by German chemist and pharmacist Johann Christian Wiegleb. He determined that earth of alum could not be synthesized from silica and alkalis, contrary to contemporary belief.)[18] French chemist Jean Gello proved the earth in clay and the earth resulting from the reaction of an alkali on alum were identical in 1739.[19] German chemist Johann Heinrich Pott showed the precipitate obtained from pouring an alkali into a solution of alum was different from lime and chalk in 1746.[20]

German chemist Andreas Sigismund Marggraf synthesized the earth of alum by boiling clay in sulfuric acid and adding potash in 1754.[16] He realized that adding soda, potash, or an alkali to a solution of the new earth in sulfuric acid yielded alum.[21] He described the earth as alkaline, as he had discovered it dissolved in acids when dried. Marggraf also described salts of this earth: chloride, nitrate and acetate.[19] In 1758, French chemist Pierre Macquer wrote that alumina[d] resembled a metallic earth.[13] In 1760, French chemist Théodore Baron d'Hénouville​(法语 expressed his confidence that alumina was a metallic earth.[13]

In 1767, Swedish chemist Torbern Bergman synthesized alum by boiling alunite in sulfuric acid and adding potash to the solution. He also synthesized alum as a reaction product between sulfates of potassium and earth of alum, demonstrating that alum was a double salt.[14] German pharmaceutical chemist Carl Wilhelm Scheele demonstrated that both alum and silica originated from clay and alum did not contain silicon in 1776.[22] Writing in 1782, French chemist Antoine Lavoisier considered alumina an oxide of a metal with an affinity for oxygen so strong that no known reducing agents could overcome it.[23]

Swedish chemist Jöns Jacob Berzelius suggested[24] the formula AlO3 for alumina in 1815.[25] The correct formula, Al2O3, was established by German chemist Eilhard Mitscherlich in 1821; this helped Berzelius determine the correct atomic weight of the metal, 27.[25]

Isolation of metal

[编辑]

This amalgam quickly separates in air, and by distillation, in an inert atmosphere, gives a lump of metal which in color and luster somewhat resembles tin.

——Danish physicist Hans Christian Ørsted in 1825, describing isolation of aluminium at the Royal Danish Academy of Sciences and Letters[26]
Close-up portrait of Hans Christian Ørsted
Hans Christian Ørsted, discoverer of aluminium metal

In 1760, Baron de Hénouville unsuccessfully attempted to reduce alumina to its metal. He claimed he had tried every method of reduction known at the time, though his methods were unpublished. It is probable he mixed alum with carbon or some organic substance, with salt or soda for flux, and heated it in a charcoal fire.[13] Austrian chemists Anton Leopold Ruprecht and Matteo Tondi repeated Baron's experiments in 1790, significantly increasing the temperatures. They found small metallic particles they believed were the sought-after metal; but later experiments by other chemists showed these were iron phosphide from impurities in the charcoal and bone ash. German chemist Martin Heinrich Klaproth commented in an aftermath, "if there exists an earth which has been put in conditions where its metallic nature should be disclosed, if it had such, an earth exposed to experiments suitable for reducing it, tested in the hottest fires by all sorts of methods, on a large as well as on a small scale, that earth is certainly alumina, yet no one has yet perceived its metallization."[27] Lavoisier in 1794[28] and French chemist Louis-Bernard Guyton de Morveau in 1795 melted alumina to a white enamel in a charcoal fire fed by pure oxygen but found no metal.[28] American chemist Robert Hare melted alumina with an oxyhydrogen blowpipe in 1802, also obtaining the enamel, but still found no metal.[27]

In 1807, British chemist Humphry Davy successfully electrolyzed alumina with alkaline batteries, but the resulting alloy contained potassium and sodium, and Davy had no means to separate the desired metal from these. He then heated alumina with potassium, forming potassium oxide but was unable to produce the sought-after metal.[27] In 1808, Davy set up a different experiment on electrolysis of alumina, establishing that alumina decomposed in the electric arc but formed metal alloyed with iron; he was unable to separate the two.[29] Finally, he tried yet another electrolysis experiment, seeking to collect the metal on iron, but was again unable to separate the coveted metal from it.[27] Davy suggested the metal be named alumium in 1808[30] and aluminum in 1812, thus producing the modern name.[29] Other scientists used the spelling aluminium; the former spelling regained usage in the United States in the following decades.[31]

American chemist Benjamin Silliman repeated Hare's experiment in 1813 and obtained small granules of the sought-after metal, which almost immediately burned.[27]

In 1824, Danish physicist Hans Christian Ørsted attempted to produce the metal. He reacted anhydrous aluminium chloride with potassium amalgam, yielding a lump of metal that looked similar to tin.[26][32][33] He presented his results and demonstrated a sample of the new metal in 1825. In 1826, he wrote, "aluminium has a metallic luster and somewhat grayish color and breaks down water very slowly"; this suggests he had obtained an aluminium–potassium alloy, rather than pure aluminium.[34] Ørsted placed little importance on his discovery.[35] He did not notify either Davy or Berzelius, both of whom he knew, and published his work in a Danish magazine unknown to the European public.[35] As a result, he is often not credited as the discoverer of the element;[36] some earlier sources claimed Ørsted had not isolated aluminium.[37]

Close-up portrait of Friedrich Wöhler
Friedrich Wöhler, pioneer researcher of the properties of aluminium

Berzelius tried isolating the metal in 1825 by carefully washing the potassium analog of the base salt in cryolite in a crucible. Prior to the experiment, he had correctly identified the formula of this salt as K3AlF6. He found no metal, but his experiment came very close to succeeding and was successfully reproduced many times later. Berzelius's mistake was in using an excess of potassium, which made the solution too alkaline and dissolved all the newly formed aluminium.[38]

German chemist Friedrich Wöhler visited Ørsted in 1827 and received explicit permission to continue the aluminium research, which Ørsted "did not have time" for.[35] Wöhler repeated Ørsted's experiments but did not identify any aluminium. (Wöhler later wrote to Berzelius, "what Oersted assumed to be a lump of aluminium was certainly nothing but aluminium-containing potassium".)[39] He conducted a similar experiment, mixing anhydrous aluminium chloride with potassium, and produced a powder of aluminium.[33] After hearing about this, Ørsted suggested his own aluminium may have contained potassium.[35] Wöhler continued his research and in 1845 was able to produce small pieces of the metal and described some of its physical properties. Wöhler's description of the properties indicates he obtained impure aluminium.[40] Other scientists also failed to reproduce Ørsted's experiment,[40] and Wöhler was credited as the discoverer for many years.[41] While Ørsted was not concerned with the priority of the discovery,[35][e] some Danes tried to demonstrate he had obtained aluminium.[35] In 1921, the reason for the inconsistency between Ørsted's and Wöhler's experiments was discovered by Danish chemist Johan Fogh, who demonstrated that Ørsted's experiment was successful thanks to use of a large amount of excess aluminium chloride and an amalgam with low potassium content.[40] In 1936, scientists from American aluminium producing company Alcoa successfully recreated that experiment.[42] However, many later sources still credit Wöhler with the discovery of aluminium, as well as its successful isolation in a relatively pure form.[43]

Early industrial production

[编辑]

My first thought was I had laid my hands on this intermediate metal which would find its place in man's uses and needs when we would find the way of taking it out of the chemists' laboratory and putting it in the industry.

——Preface of Aluminium, its properties, manufacture and applications, book written by French chemist Henri Étienne Sainte-Claire Deville in 1859[44]
Wood engraving of a portrait of Henri Étienne Sainte-Claire Deville
Henri Étienne Sainte-Claire Deville was the first to establish a method to manufacture aluminium.

Since Wöhler's method could not yield large amounts of aluminium, the metal remained uncommon; its cost[f] had exceeded that of gold before a new method was devised.[45] Prices followed: in 1852, aluminium was sold at US$34 per ounce.[46] In comparison, the price of gold at the time was $19 per ounce.[47]

French chemist Henri Étienne Sainte-Claire Deville announced an industrial method of aluminium production in 1854 at the Paris Academy of Sciences.[48] Aluminium chloride could be reduced by sodium, a metal more convenient and less expensive than potassium used by Wöhler.[49] Deville was able to produce an ingot of the metal.[50] Napoleon III of France promised Deville an unlimited subsidy for aluminium research; in total, Deville used 36,000 French francs—20 times the annual income of an ordinary family.[51] Napoleon's interest in aluminium lay in its potential military use: he wished weapons, helmets, armor, and other equipment for the French army could be made of the new light, shiny metal.[51] While the metal was still not displayed to the public, Napoleon is reputed to have held a banquet where the most honored guests were given aluminium utensils while others made do with gold.[45]

Twelve small ingots of aluminium were later exhibited for the first time to the public at the Exposition Universelle of 1855.[51] The metal was presented as "the silver from clay" (aluminium is very similar to silver visually), and this name was soon widely used.[51] It attracted widespread attention; it was suggested aluminium be used in arts, music, medicine, cooking, and tableware.[52] The metal was noticed by the avant-garde writers of the time—Charles Dickens, Nikolay Chernyshevsky, and Jules Verne—who envisioned its use in the future.[53] However, not all of attention was favorable. Newspapers wrote, "The Parisian expo put an end to the fairy tale of the silver from clay", saying that much of what had been said about the metal was exaggerated if not untrue and that the amount of the presented metal—about a kilogram—contrasted with what had been expected and was "not a lot for a discovery that was said to turn the world upside down".[51] Overall, the fair led to the eventual commercialization of the metal.[53] That year, aluminium was put to the market at a price of 300 F per kilogram.[54] At the next fair in Paris in 1867, visitors were presented with aluminium wire and foil as well a new alloy—aluminium bronze, notable for its low cost of production, high resistance to corrosion, and desirable mechanical properties.[55]

Front and back of a shiny silver coin, front with the picture of a bearded man; back with the value and date surrounded by a wreath of leaves
1857 20 French francs aluminium coin featuring a portrait of Napoleon III of France, patron of research of aluminium production

Manufacturers did not wish to divert resources from producing well-known (and marketable) metals, such as iron and bronze, to experiment with a new one; moreover, produced aluminium was still not of great purity and differed in properties by sample. This led to an initial general reluctance to produce the new metal.[51] Deville and partners established the world's first industrial production of aluminium at a smelter in Rouen in 1856.[48] Deville's smelter moved that year to La Glacière and then Nanterre, and in 1857 to Salindres. For the factory in Nanterre, an output of 2 kilograms of aluminium per day was recorded;[56] with a purity of 98%.[57] Originally, production started with synthesis of pure alumina, which was obtained from calcination of ammonium alum. In 1858, Deville was introduced to bauxite and soon developed into what became known as the Deville process, employing the mineral as a source for alumina production.[58] In 1860, Deville sold his aluminium interests to Henri Merle, a founder of Compagnie d'Alais et de la Camargue; this company dominated the aluminium market in France decades later.[59]

Upper part of the Washington Monument
The 2.85-千克(6.3-英磅) capstone of the Washington Monument (Washington, D.C.) was made from aluminium in 1884. At the time, it was the largest piece of aluminium ever cast.[60]

Some chemists, including Deville, sought to use cryolite as the source ore, but with little success.[61] British engineer William Gerhard set up a plant with cryolite as the primary raw material in Battersea, London, in 1856, but technical and financial difficulties forced the closure of the plant in three years.[57] British ironmaster Isaac Lowthian Bell produced aluminium from 1860 to 1874. During the opening of his factory, he waved to the crowd with a unique and costly aluminium top hat.[62] No statistics about this production can be recovered, but it "cannot be very high".[63] Deville's output grew to 1 metric ton per year in 1860; 1.7 metric tons in 1867; and 1.8 metric tons in 1872.[63] At the time, demand for aluminium was low: for example, sales of Deville's aluminium by his British agents equaled 15 kilograms in 1872.[57] Aluminium at the time was often compared with silver; like silver, it was found to be suitable for making jewelry and objéts d'art.[55] Price for aluminium steadily declined to 240 F in 1859; 200 F in 1862; 120 F in 1867.[64]

Other production sites began to appear in the 1880s. British engineer James Fern Webster launched the industrial production of aluminium by reduction with sodium in 1882; his aluminium was much purer than Deville's (it contained 0.8% impurities whereas Deville's typically contained 2%).[65] World production of aluminium in 1884 equaled 3.6 metric tons.[66] In 1884, American architect William Frishmuth combined production of sodium, alumina, and aluminium into a single technological process; this contrasted with the previous need to collect sodium, which combusts in water and sometimes air;[67] his aluminium production cost was about $16 per pound (compare to silver's cost of $19 per pound, or the French price, an equivalent of $12 per pound).[68] In 1885, Aluminium- und Magnesiumfabrik started production in Hemelingen.[69] Its production figures strongly exceeded those of the factory in Salindres but the factory stopped production in 1888.[70] In 1886, American engineer Hamilton Castner devised a method of cheaper production of sodium, which decreased the cost of aluminium production to $8 per pound, but he did not have enough capital to construct a large factory like Deville's.[71] In 1887, he constructed a factory in Oldbury; Webster constructed a plant nearby and bought Castner's sodium to use it in his own production of aluminium.[65] In 1889, German metallurgist Curt Netto launched a method of reduction of cryolite with sodium that produced aluminium containing 0.5–1.0% of impurities.[72]

Electrolytic production and commercialization

[编辑]

I'm going for that metal.

——Purportedly, American student Charles Martin Hall in 1880, after hearing from his chemistry professor that an industrial production of aluminium would be a great good for the humanity and a source of wealth for the discoverer[66]
Cover of Hall's patent for electrolytic aluminium production
Cover of the patent granted to Charles Martin Hall for his process of reducing aluminium by electrolysis. Hall applied for the patent two months after Héroult; as a result, it took him almost three years to prove the originality of his method and the patent was only granted in 1889.[73]

Aluminium was first produced independently using electrolysis in 1854 by the German chemist Robert Wilhelm Bunsen and Deville. Their methods did not become the basis for industrial production of aluminium because electrical supplies were inefficient at the time. This only changed with Belgian engineer Zénobe-Théophile Gramme's invention of the dynamo in 1870, which made creation of large amounts of electricity possible. The invention of the three-phase current by Russian engineer Mikhail Dolivo-Dobrovolsky in 1889 made transmission of this electricity over long distances achievable.[74] Soon after his discovery, Bunsen moved on to other areas of interest while Deville's work was noticed by Napoleon III; this was the reason Deville's Napoleon-funded research on aluminium production had been started. Deville quickly realized electrolytic production was impractical at the time and moved on to chemical methods, presenting results later that year.[66][75]

Electrolytic mass production remained difficult because electrolytic baths could not withstand a prolonged contact with molten salts, succumbing to corrosion. The first attempt to overcome this for aluminium production was made by American engineer Charles Bradley in 1883. Bradley heated aluminium salts internally: the highest temperature was inside the bath and the lowest was on its walls, where salts would solidify and protect the bath. Bradley then sold his patent claim to brothers Alfred and Eugene Cowles, who used it at a smelter in Lockport and later in Stoke-upon-Trent but the method was modified to yield alloys rather than pure aluminium.[76] Bradley applied for a patent in 1883; due to his broad wordings, it was rejected as composed of prior art. After a necessary two-year break, he re-applied. This process lasted for six years as the patent office questioned whether Bradley's ideas were original.[77] When Bradley was granted a patent, electrolytic aluminium production had already been in place for several years.[78]

The first large-scale production method was independently developed by French engineer Paul Héroult and American engineer Charles Martin Hall in 1886; it is now known as the Hall–Héroult process. Electrolysis of pure alumina is impractical given its very high melting point; both Héroult and Hall realized it could be lowered significantly by the presence of molten cryolite.[g] Héroult was granted a patent in France in April[80] and subsequently in several other European countries;[81] he also applied for a U.S. patent in May.[80] After securing a patent, Héroult could not find interest in his invention. When asking professionals for advice, he was told there was no demand for aluminium but some for aluminium bronze. The factory in Salindres did not wish to improve their process. In 1888, Héroult and his companions founded Aluminium Industrie Aktiengesellschaft and started industrial production of aluminium bronze in Neuhausen am Rheinfall. Then, Société électrométallurgique française was founded in Paris. They convinced Héroult to return to France, purchased his patents, and appointed him as the director of a smelter in Isère, which produced aluminium bronze on a large scale at first and pure aluminium in a few months.[82][83]

Statue of Anteros, Greek god of requited love, on Piccadilly Circus in London
Statue of Anteros, Greek god of requited love, on Piccadilly Circus in London. This statue was erected in 1893 and is considered the first major work in aluminium.[84]

At the same time, Hall produced aluminium by the same process in his home at Oberlin.[85] He applied for a patent in July, and the patent office notified Hall of an "interference" with Héroult's application. The Cowles brothers offered legal support. By then, Hall had failed to develop a commercial process for his first investors, and he turned to experimenting at Cowles' smelter in Lockport. He experimented for a year without much success but gained attention of investors.[h] Hall co-founded the Pittsburgh Reduction Company in 1888 and initiated production of aluminium.[87] Hall's patent was granted in 1889.[73][i] In 1889, Hall's production began to use the principle of internal heating.[j] By September 1889, Hall's production grew to 385英磅(175千克) at a cost of $0.65 per pound.[90] By 1890, Hall's company still lacked capital and did not pay dividends; Hall had to sell some of his shares to attract investments.[91] During that year, a new factory in Patricroft was constructed.[92] The smelter in Lockport was unable to withstand the competition and shut down by 1892.[93]

The Hall–Héroult process converts alumina into the metal. Austrian chemist Carl Josef Bayer discovered a way of purifying bauxite to yield alumina in 1888 at a textile factory in Saint Petersburg and was issued a patent later that year;[94] this is now known as the Bayer process. Bayer sintered bauxite with alkali and leached it with water; after stirring the solution and introducing a seeding agent to it, he found a precipitate of pure aluminium hydroxide, which decomposed to alumina on heating. In 1892, while working at a chemical plant in Yelabuga, he discovered the aluminium contents of bauxite dissolved in the alkaline leftover from isolation of alumina solids; this was crucial for the industrial employment of this method. He was issued a patent later that year.[94][95]

World production of aluminium in 1885–1899

The total amount of unalloyed aluminium produced using Deville's chemical method from 1856 to 1889 equals 200 metric tons.[48] Production in 1890 alone was 175 metric tons. It grew to 715 metric tons in 1893 and to 4,034 metric tons in 1898.[70] The price fell to $2 per pound in 1889 and to $0.5 per pound in 1894.[96]

By the end of 1889, a consistently high purity of aluminium produced via electrolysis had been achieved.[97] In 1890, Webster's factory went obsolete after an electrolysis factory was opened in England.[67] Netto's main advantage, the high purity of the resulting aluminium, was outmatched by electrolytic aluminium and his company closed the following year.[97] Compagnie d'Alais et de la Camargue also decided to switch to electrolytic production, and their first plant using this method was opened in 1895.[73]

Modern production of the aluminium metal is based around the Bayer and Hall–Héroult processes. It was further improved in 1920 by a team led by Swedish chemist Carl Wilhelm Söderberg. Previously, anode cells had been made from pre-baked coal blocks, which quickly corrupted and required replacement; the team introduced continuous electrodes made from a coke and tar paste in a reduction chamber. This greatly increased the world output of aluminium.[98]

Mass usage

[编辑]

Give us aluminum in the right quantity, and we will be able to fight for another four years.

——Soviet leader Joseph Stalin to Harry Hopkins, personal representative of the U.S. President Franklin D. Roosevelt, in August 1941[99]
A graph showing the nominal (in contemporary United States dollars) and real (in 1998 United States dollars) prices of aluminium since 1900
Nominal (in contemporary United States dollars, in blue) and real (in 1998 United States dollars, in red) prices of aluminium since 1900

Prices for aluminium declined, and by the early 1890s, the metal had become widely used in jewelry, eyeglass frames, optical instruments, and many everyday items. Aluminium cookware began to be produced in the late 19th century and gradually supplanted copper and cast iron cookware in the first decades of the 20th century. Aluminium foil was popularized at that time. Aluminium is soft and light, but it was soon discovered that alloying it with other metals could increase its hardness while preserving its low density. Aluminium alloys found many uses in the late 19th and early 20th centuries. For instance, aluminium bronze is applied to make flexible bands, sheets, and wire, and is widely employed in the shipbuilding and aviation industries.[100] Aviation used a new aluminium alloy, duralumin, invented in 1903.[101] Aluminium recycling began in the early 1900s and has been used extensively since[102] as aluminium is not impaired by recycling and thus can be recycled repeatedly.[103] At this point, only the metal that had not been used by end-consumers was recycled.[104] During World War I, major governments demanded large shipments of aluminium for light strong airframes. They often subsidized factories and the necessary electrical supply systems.[105][106] Overall production of aluminium peaked during the war: world production of aluminium in 1900 was 6,800 metric tons; in 1916, annual production exceeded 100,000 metric tons.[104] The war created a greater demand for aluminium, which the growing primary production was unable to fully satisfy, and recycling grew intensely as well.[102] The peak in production was followed by a decline, then a swift growth.[104]

Wright brothers' first flight
The first aviation flight was performed by the Wright brothers in 1903. A strong light material was needed for the engine of the Wright Flyer; light aluminium alloyed with copper for strength was used.[107]

During the first half of the 20th century, the real price for aluminium fell continuously from $14,000 per metric ton in 1900 to $2,340 in 1948 (in 1998 United States dollars). There were some exceptions such as the sharp price rise during World War I.[104] Aluminium was plentiful, and in 1919 Germany began to replace its silver coins with aluminium ones; more and more denominations were switched to aluminium coins as hyperinflation progressed in the country.[108] By the mid-20th century, aluminium had become a part of everyday lives, becoming an essential component of housewares.[109] Aluminium freight cars first appeared in 1931. Their lower mass allowed them to carry more cargo.[106] During the 1930s, aluminium emerged as a civil engineering material used in both basic construction and building interiors.[110] Its use in military engineering for both airplanes and tank engines advanced.[111]

Aluminium obtained from recycling was considered inferior to primary aluminium because of poorer chemistry control as well as poor removal of dross and slags. Recycling grew overall but depended largely on the output of primary production: for instance, as electric energy prices declined in the United States in the late 1930s, more primary aluminium could be produced using the energy-expensive Hall–Héroult process. This rendered recycling less necessary, and thus aluminium recycling rates went down.[102] By 1940, mass recycling of post-consumer aluminium had begun.[104]

Bagged aluminium supplies piled up before carts of aluminium metal
During World War II, the British collected aluminium utensils from households. The aluminium was made into aircraft.[112]

During World War II, production peaked again, exceeding 1,000,000 metric tons for the first time in 1941.[104] Aluminium was used heavily in aircraft production and was a strategic material of extreme importance; so much so that when Alcoa (successor of Hall's Pittsburgh Reduction Company and the aluminium production monopolist in the United States at the time) did not expand its production, the United States Secretary of the Interior proclaimed in 1941, "If America loses the war, it can thank the Aluminum Corporation of America".[113] In 1939, Germany was the world's leading producer of aluminium; the Germans thus saw aluminium as their edge in the war. Aluminium coins continued to be used but while they symbolized a decline on their introduction, by 1939, they had come to represent power.[114] (In 1941, they began to be withdrawn from circulation.)[115] After the United Kingdom was attacked in 1940, it started an ambitious program of aluminium recycling; the newly appointed Minister of Aircraft Production appealed to the public to donate any household aluminium for airplane building.[112] The Soviet Union received 328,100 metric tons of aluminium from its co-combatants from 1941 to 1945;[116] this aluminium was used in aircraft and tank engines.[117] Without these shipments, the output of the Soviet aircraft industry would have fallen by over a half.[118]

After the wartime peak, world production fell for three late-war and post-war years but then regained its rapid growth.[104] In 1954, the world output equaled 2,810,000 metric tons;[104] this production surpassed that of copper,[k] historically second in production only to iron,[120] making it the most produced non-ferrous metal.

Aluminium Age

[编辑]

Nothing stops time. One epoch follows another, and sometimes we don't even notice it. The Stone Age... The Bronze Age... The Iron Age... [...] However one may assert that it is now that we stand on the threshold of the Aluminium Age.

——Russian aluminium producing company RUSAL in their book Aluminium: The Thirteenth Element in 2007[121]
Aluminium can
铝罐

Earth's first artificial satellite, launched in 1957, consisted of two joined aluminium hemispheres. All subsequent spacecraft have used aluminium to some extent.[98] The aluminium can was first manufactured in 1956 and employed as a container for drinks in 1958.[122] In the 1960s, aluminium was employed for the production of wires and cables.[123] Since the 1970s, high-speed trains have commonly used aluminium for its high strength-to-weight ratio. For the same reason, the aluminium content of cars is growing.[106]

By 1955, the world market had been dominated by the Six Majors: Alcoa, Alcan (originated as a part of Alcoa), Reynolds, Kaiser, Pechiney (merger of Compagnie d'Alais et de la Camargue that bought Deville's smelter and Société électrométallurgique française that hired Héroult), and Alusuisse (successor of Héroult's Aluminium Industrie Aktien Gesellschaft); their combined share of the market equaled 86%.[124] From 1945, aluminium consumption grew by almost 10% each year for nearly three decades, gaining ground in building applications, electric cables, basic foils and the aircraft industry. In the early 1970s, an additional boost came from the development of aluminium beverage cans.[125] The real price declined until the early 1970s;[126] in 1973, the real price equaled $2,130 per metric ton (in 1998 United States dollars).[104] The main drivers of the drop in price was the decline of extraction and processing costs, technological progress, and the increase in aluminium production,[126] which first exceeded 10,000,000 metric tons in 1971.[104]

Formwork at the Volokolamskaya metro station of the Moscow metro system
Formwork at the Volokolamskaya metro station of the Moscow Metro

In the late 1960s, governments became aware of waste from the industrial production; they enforced a series of regulations favoring recycling and waste disposal. Söderberg anodes, which save capital and labor to bake the anodes but are more harmful to the environment (because of a greater difficulty in collecting and disposing of the baking fumes),[127] fell into disfavor, and production began to shift back to the pre-baked anodes.[128] The aluminium industry began promoting the recycling of aluminium cans in an attempt to avoid restrictions on them.[102] This sparked recycling of aluminium previously used by end-consumers: for example, in the United States, levels of recycling of such aluminium increased 3.5 times from 1970 to 1980 and 7.5 times to 1990.[104] Production costs for primary aluminium grew in the 1970s and 1980s, and this also contributed to the rise of aluminium recycling.[102] Closer composition control and improved refining technology diminished the quality difference between primary and secondary aluminium.[102]

In the 1970s, the increased demand for aluminium made it an exchange commodity; it entered the London Metal Exchange, the world's oldest industrial metal exchange, in 1978.[98] Since then, aluminium has been traded for United States dollars and its price fluctuated along with the currency's exchange rate.[129] The need to exploit lower-grade poorer quality deposits and fast increasing input costs of energy, but also bauxite, as well as changes in exchange rates and greenhouse gas regulation, increased the net cost of aluminium;[126] the real price grew in the 1970s.[130]

Graph of world production of aluminium since 1900
World production of aluminium since 1900

The increase of the real price, and changes of tariffs and taxes, began the redistribution of world producers' shares: the United States, the Soviet Union, and Japan accounted for nearly 60% of world's primary production in 1972 (and their combined share of consumption of primary aluminium was also close to 60%);[131] but their combined share only slightly exceeded 10% in 2012.[132] The production shift began in the 1970s with production moving from the United States, Japan, and Western Europe to Australia, Canada, the Middle East, Russia, and China, where it was cheaper due to lower electricity prices and favorable state regulation, such as low taxes or subsidies.[133] Production costs in the 1980s and 1990s declined because of advances in technology, lower energy and alumina prices, and high exchange rates of the United States dollar.[134]

In the 2000s, the BRIC countries' (Brazil, Russia, India and China) combined share grew from 32.6% to 56.5% in primary production and 21.4% to 47.8% in primary consumption.[135] China has accumulated an especially large share of world production, thanks to an abundance of resources, cheap energy, and governmental stimuli;[136] it also increased its share of consumption from 2% in 1972 to 40% in 2010.[137] The only other country with a two-digit percentage was the United States with 11%; no other country exceeded 5%.[138] In the United States, Western Europe and Japan, most aluminium was consumed in transportation, engineering, construction, and packaging.[138]

In the mid-2000s, increasing energy, alumina and carbon (used in anodes) prices caused an increase in production costs. This was amplified by a shift in currency exchange rates: not only a weakening of the United States dollar, but also a strengthening of the Chinese yuan. The latter became important as most Chinese aluminium was relatively cheap.[139]

World output continued growing: in 2013, annual production of aluminium exceeded 50,000,000 metric tons. In 2015, it was a record 57,500,000 metric tons.[104] Aluminium is produced in greater quantities than all other non-ferrous metals combined.[140] Its real price (in 1998 United States dollars) in 2015 was $1,340 per metric ton ($1,940 per ton in contemporary dollars).[104]

See also

[编辑]

Notes

[编辑]
  1. ^ Deville had established that heating a mixture of sodium chloride, clay, and charcoal yields numerous aluminium globules. This was published in the Proceedings of the Academy of Sciences but eventually forgotten.[4] French chemist André Duboin discovered that heating a mixture of borax, alumina, and smaller quantities of dichromate and silica in a crucible formed impure aluminium. Boric acid is abundant in Italy. According to Duboin, this hints at the possibility that boric acid, potash, and clay under the reducing influence of coal may have produced aluminium in Rome.[4]
  2. ^ A similar story is attributed to Pliny, which mentions instead a light bright metal extracted from clay—a description that matches that of aluminium. Both Petronius and Pliny, however, mentioned glass[6] (and Dio did not mention the material at all).[7] A possible source of the error is French general Louis Gaspard Gustave Adolphe Yvelin de Béville, who was openly cited by Deville in 1864. De Béville searched in the Roman sources for possible ancient mentions of the new metal and discovered among others the story in Satiricon. De Béville might have misinterpreted Petronius's expression aurum pro luto habere (literally "to have gold as dirt"), assuming that lutum stands for "clay" (a possible translation), whereas the word throughout the book actually means something valueless in general. German chemist Gerhard Eggert concluded that this story was erroneous.[6] After evaluating other possible explanations, he announced the original story was also probably made up; however, he did not evaluate Duboin's suggestion.[6]
  3. ^ Alumina was plentiful and could be reduced by coke in the presence of copper, giving aluminium–copper alloys. Existing works by Chinese alchemists show that alloys with a small aluminium content could be produced in China. The Chinese did not have the technology to produce pure aluminium and the temperatures needed (around 2000 °C) were unachievable. A number of high-aluminium artifacts were found in China supposedly relating to the times of the first Jin dynasty, but it was later shown the technology needed to make them was not available at the time and thus the artifacts were not authentic.[8]
  4. ^ The terms "earth of alum" and "alumina" refer to the same substance. German-speaking authors mentioned in this section used "earth of alum" (Alaun-Erde), while French authors used "alumina" (alumine).
  5. ^ Ørsted's description of the isolation of the new element, as recorded by the Royal Danish Academy of Sciences and Letters,[26] does not include a name for the metal, neither the name "aluminium" nor a suggestion of his own; in comparison, Wöhler put the word "aluminium" into the title of his article.[33]
  6. ^ Note the difference between cost and price. Cost is the amount of money (and, sometimes, other resources, such as time) that was spent in making a product whereas price is the amount of money (or, sometimes, other goods or services) the product is sold for. Manufacturer's price equals cost plus manufacturer's profit.
  7. ^ Although very similar and now commonly seen as one, Hall and Héroult processes had some small initial differences. For instance, Héroult used coal anodes while Hall used copper.[79]
  8. ^ The Cowles brothers did not wish to change their production method because they feared that a mass production of aluminium would immediately reduce the metal's price. The president of the company considered purchasing Hall's patent (which was still not granted at the time) to ensure competitors would not make use of it.[86]
  9. ^ Hall was able to prove his originality thanks to his keeping record on experiments. Hall documented the isolation of aluminium in February 1886, and his family members provided evidence for that. In contrast, the earliest date Héroult's invention could be traced back to was the date of granting him the French patent in April.[80]
  10. ^ The principle of internal heating was missing from Hall's patent; as such, the Cowles brothers believed Hall had stolen it from them and sued his company in 1891. This lawsuit was only resolved in 1903; the Pittsburgh Reduction Company had to pay a large indemnity.[88][89]
  11. ^ Compare annual statistics of aluminium[104] and copper[119] production by USGS.

References

[编辑]
  1. ^ 1.0 1.1 Setton, Kenneth Meyer. Pius II, the Crusade, and the Venetian war against the Turks. The Papacy and the Levant, 1204–1571: The fifteenth century. American Philosophical Society. 1976: 231–270. ISBN 978-0-87169-127-9. 
  2. ^ Drozdov 2007,第12页.
  3. ^ Drozdov 2007,第12–14页.
  4. ^ 4.0 4.1 4.2 4.3 Duboin, A. Les Romains ont-ils connu l'aluminium ? [Did the Romans know about aluminum?]. La Revue Scientifique. 1902, 18 (24): 751–753 [2018-11-16]. (原始内容存档于2018-11-16) (法语). 
  5. ^ Pliny's Natural History. 由Rackham, H.; Jones, W. H. S.; Eichholz, D. E.翻译. Harvard University Press; William Heinemann. 1949–1954. (原始内容存档于January 1, 2017). 
  6. ^ 6.0 6.1 6.2 Eggert, Gerhard. Ancient aluminum? Flexible glass? Looking for the real heart of a legend (PDF). Skeptical Inquirer. 1995, 19 (3): 37–40. 
  7. ^ Foster, Herbert Baldwin (编). Dio's Roman History (PDF). 由Cary, Earnest翻译 7. William Heinemann Limited; Harvard University Press. 1954: 173 [2018-12-04]. (原始内容存档 (PDF)于2016-06-20). 
  8. ^ Butler, Anthony R.; Glidewell, Christopher; Pritchard, Sharee E. Aluminium Objects from a Jin Dynasty Tomb – Can They Be Authentic?. Interdisciplinary Science Reviews. 1986, 11 (1): 88–94. doi:10.1179/isr.1986.11.1.88. 
  9. ^ Drozdov 2007,第16页.
  10. ^ Clapham, John Harold; Power, Eileen Edna. The Cambridge Economic History of Europe: From the Decline of the Roman Empire. CUP Archive. 1941: 207. ISBN 978-0-521-08710-0. 
  11. ^ Balston, John Noel. Appendix I – In Defence of Alum. The Whatmans and Wove Paper: Its Invention and Development in the West: Research Into the Origins of Wove Paper and of Genuine Loom-Woven Wirecloth 3. John Balston. 1998: 198. ISBN 978-0-9519505-3-1. 
  12. ^ Drozdov 2007,第17–18页.
  13. ^ 13.0 13.1 13.2 13.3 Richards 1896,第3页.
  14. ^ 14.0 14.1 14.2 Drozdov 2007,第25页.
  15. ^ Weeks, Mary Elvira. Discovery of the elements 1 7. Journal of Chemical Education. 1968: 187. 
  16. ^ 16.0 16.1 16.2 16.3 Richards 1896,第2页.
  17. ^ Drozdov 2007,第26页.
  18. ^ Wiegleb, Johann Christian. Geschichte des wachsthums und der erfindungen in der chemie, in der neuern zeit [History of growth and inventions in chemistry in the modern time]. Nicolai, Christoph Friedrich. 1790: 357. 
  19. ^ 19.0 19.1 Drozdov 2007,第27页.
  20. ^ Pott, Johann Heinrich. Chymische Untersuchungen, welche fürnehmlich von der Lithogeognosia oder Erkäntniß und Bearbeitung der gemeinen einfacheren Steine und Erden ingleichen von Feuer und Licht handeln [Chemical investigations which primarily concern lithogeognosia or knowledge and processing of common simple rocks and earths as well as fire and light]] 1. Voss, Christian Friedrich. 1746: 32 [2017-11-10]. (原始内容存档于2016-12-22) (德语). 
  21. ^ Chisholm, Hugh (编). Encyclopædia Britannica 11. Cambridge University Press. 1911.  |entry=被忽略 (帮助)
  22. ^ Lennartson, Anders. The Chemical Works of Carl Wilhelm Scheele. Springer International Publishing. 2017: 32. ISBN 978-3-319-58181-1. 
  23. ^ Richards 1896,第3–4页.
  24. ^ Wurtz, Adolphe. An introduction to chemical philosophies, according to modern theories. Chemical News. 1865, 15: 99. 
  25. ^ 25.0 25.1 Drozdov 2007,第31页.
  26. ^ 26.0 26.1 26.2 Royal Danish Academy of Sciences and Letters. Det Kongelige Danske Videnskabernes Selskabs philosophiske og historiske afhandlinger [The philosophical and historical dissertations of the Royal Danish Academy of Sciences and Letters]. Popp. 1827: xxv–xxvi [2017-11-10]. (原始内容存档于2017-03-24) (丹麦语). 
  27. ^ 27.0 27.1 27.2 27.3 27.4 Richards 1896,第4页.
  28. ^ 28.0 28.1 Guyton, Louis-Bernard. Expériences comparatives sur les terres, pour déterminer leur fusibilité, leur manière de se comporter avec les flux salins ou vitreux, et l'action dissolvante qu'elles exercent réciproquement les unes sur les autres [Comparative experiments on the earth, to determine their fusibility, their behavior with the saline or vitreous flows, and the dissolving action they exert on each other]. Journal de l'École Polytechnique. 1795, 3: 299 [2017-11-11]. (原始内容存档于2017-11-11) (法语). 
  29. ^ 29.0 29.1 Davy, Humphry. Of metals; their primary compositions with other uncompounded bodies, and with each other. Elements of Chemical Philosophy: Part 1 1. Bradford and Inskeep. 1812: 201. 
  30. ^ Davy, Humphry. Electro Chemical Researches, on the Decomposition of the Earths; with Observations on the Metals obtained from the alkaline Earths, and on the Amalgam procured from Ammonia. Philosophical Transactions of the Royal Society. 1808, 98: 353. Bibcode:1808RSPT...98..333D. doi:10.1098/rstl.1808.0023可免费查阅. 
  31. ^ Quinion, Michael. Port Out, Starboard Home: The Fascinating Stories We Tell About the words We Use. Penguin Books Limited. 2005: 23–24. ISBN 978-0-14-190904-2. 
  32. ^ Örsted, H. C. Oversigt over det Kongelige Danske Videnskabernes Selskabs Forhanlingar og dets Medlemmerz Arbeider, fra 31 Mai 1824 til 31 Mai 1825 [Overview of the Royal Danish Science Society's Proceedings and the Work of its Members, from 31 May 1824 to 31 May 1825]: 15–16. 1825 (Danish). 
  33. ^ 33.0 33.1 33.2 Wöhler, Friedrich. Ueber das Aluminium [About aluminium]. Annalen der Physik und Chemie. 2. 1827, 11 (9): 146–161. Bibcode:1828AnP....87..146W. doi:10.1002/andp.18270870912 (德语). 
  34. ^ Drozdov 2007,第36页.
  35. ^ 35.0 35.1 35.2 35.3 35.4 35.5 Christensen, Dan Ch. Aluminium: Priority and Nationalism. Hans Christian Ørsted: Reading Nature's Mind. OUP Oxford. 2013: 424–430. ISBN 978-0-19-164711-6. 
  36. ^ Fontani, Marco; Costa, Mariagrazia; Orna, Mary Virginia. The Lost Elements: The Periodic Table's Shadow Side. Oxford University Press. 2015: 30. ISBN 978-0-19-938334-4. 
  37. ^ Larned, Josephus Nelson. The New Larned History for Ready Reference, Reading and Research: The Actual Words of the World's Best Historians, Biographers and Specialists; a Complete System of History for All Uses, Extending to All Countries and Subjects and Representing the Better and Newer Literature of History. C.A. Nichols Publishing Company. 1923: 4472. 
  38. ^ Richards 1896,第4–5页.
  39. ^ Bjerrum, Niels. Die Entdeckung des Aluminiums [Discovery of aluminium]. Zeitschrift für Angewandte Chemie. 1926, 39 (9): 316–317. ISSN 0044-8249. doi:10.1002/ange.19260390907 (德语). 
  40. ^ 40.0 40.1 40.2 Drozdov 2007,第38页.
  41. ^ Holmes, Harry N. Fifty Years of Industrial Aluminum. The Scientific Monthly. 1936, 42 (3): 236–239. Bibcode:1936SciMo..42..236H. JSTOR 15938. 
  42. ^ Skrabec 2017,第10–11页.
  43. ^ Lide, David R. CRC Handbook of Chemistry and Physics: A Ready-reference Book of Chemical and Physical Data. CRC Press. 1995: 4-3. ISBN 978-0-8493-0595-5. 
  44. ^ Laparra, Maurice. A portrait of aluminium, metal of dream and modernity (PDF) (报告). Institute for the History of Aluminium: 3. 2015 [December 19, 2018]. (原始内容 (PDF)存档于August 29, 2016). 
  45. ^ 45.0 45.1 Venetski, S. 'Silver' from clay. Metallurgist. 1969, 13 (7): 451–453. S2CID 137541986. doi:10.1007/BF00741130. 
  46. ^ Aluminum: Where We Stand. Kiplinger's Finance (Kiplinger Washington Agency). 1948: 29. ISSN 1528-9729 (英语). 
  47. ^ Kallianiotis, John N. International Financial Transactions and Exchange Rates: Trade, Investment, and Parities. Springer. 2013: 270. ISBN 978-1-137-35693-2. 
  48. ^ 48.0 48.1 48.2 Drozdov 2007,第39页.
  49. ^ Sainte-Claire Deville, H. E. De l'aluminium, ses propriétés, sa fabrication [Aluminium, its properties, its manufacture]. Mallet-Bachelier. 1859. (原始内容存档于30 April 2016) (法语). 
  50. ^ Skrabec 2017,第11页.
  51. ^ 51.0 51.1 51.2 51.3 51.4 51.5 Drozdov 2007,第46页.
  52. ^ Nichols, Sarah C.; Agro, Elisabeth R.; Teller, Elizabeth; Antonelli. Teller, Elizabeth; Antonelli, Paola , 编. Aluminum by design. Carnegie Museum of Art. 2000: 66. ISBN 978-0-8109-6721-2. 
  53. ^ 53.0 53.1 Skrabec 2017,第12页.
  54. ^ Essig, Charles James. The American Text-book of Prosthetic Dentistry: In Contributions by Eminent Authorities. Lea Brothers. 1900: 148. 
  55. ^ 55.0 55.1 Drozdov 2007,第49页.
  56. ^ Drozdov 2007,第41页.
  57. ^ 57.0 57.1 57.2 McNeil 2002,第104页.
  58. ^ McNeil 2002,第103–104页.
  59. ^ McNeil 2002,第103页.
  60. ^ Binczewski, George J. The Point of a Monument: A History of the Aluminum Cap of the Washington Monument. JOM. 1995, 47 (11): 20–25 [2017-11-10]. Bibcode:1995JOM....47k..20B. S2CID 111724924. doi:10.1007/bf03221302. (原始内容存档于2016-01-24). 
  61. ^ Drozdov 2007,第43–45页.
  62. ^ Howell, Georgina. Gertrude Bell: Queen of the Desert, Shaper of Nations. Farrar, Straus and Giroux. 2010: 4–5. ISBN 978-1-4299-3401-5. 
  63. ^ 63.0 63.1 Aluminum. Report on Mineral Industries in the United States at the Eleventh Census, 1890. U.S. Government Printing Office. 1892: 280–281. 
  64. ^ Büttner, Alex; Feez, Fred. Metall aus Lehm. (Der hundertjährige Kampf um d. Wunderstoff Aluminium.) [Metal from clay. (The one-hundred-years-long struggle for the miraculous substance aluminium.)]. Goldmann. 1938: 40 (德语). 
  65. ^ 65.0 65.1 McNeil 2002,第105页.
  66. ^ 66.0 66.1 66.2 Geller, Tom. Aluminum: Common Metal, Uncommon Past. Distillations (Science History Institute). 2007 [2018-12-04]. (原始内容存档于2019-04-26). 
  67. ^ 67.0 67.1 Drozdov 2007,第45页.
  68. ^ Skrabec 2017,第14–15页.
  69. ^ Friedrich, Horst E.; Mordike, Barry Leslie. Magnesium Technology: Metallurgy, Design Data, Automotive Applications. Springer Science & Business Media. 2006: 3. ISBN 978-3-540-20599-9. 
  70. ^ 70.0 70.1 Belli, Peter Josef. Das Lautawerk der Vereinigte Aluminium-Werke AG (VAW) von 1917 bis 1948: ein Rüstungsbetrieb in regionalen, nationalen, internationalen und politischen Kontexten : (zugleich ein Beitrag zur Industriegeschichte der Niederlausitz) [The Lauta factory of Vereinigte Aluminium-Werke AG (VAW) from 1917 to 1948: an armament factory in regional, national, and political contexts: (at the same time, an entry to the history of the industry of Lower Lusatia)]. LIT Verlag Münster. 2012: 30–31. ISBN 978-3-643-11716-8 (德语). 
  71. ^ Skrabec 2017,第15页.
  72. ^ Netto, C. Die Herstellung von Aluminium. Zeitschrift für Angewandte Chemie. 1889, 2 (16): 448–451. ISSN 0044-8249. doi:10.1002/ange.18890021603 (德语). 
  73. ^ 73.0 73.1 73.2 Drozdov 2007,第59页.
  74. ^ Drozdov 2007,第52–53页.
  75. ^ Crosland, Maurice. Science Under Control: The French Academy of Sciences 1795-1914. Cambridge University Press. 2002: 252. ISBN 978-0-521-52475-9. 
  76. ^ Drozdov 2007,第54页.
  77. ^ Meiers, Peter. Manufacture of Aluminum. [2019-06-15]. 
  78. ^ McNeil 2002,第107页.
  79. ^ Skrabec 2017,第35页.
  80. ^ 80.0 80.1 80.2 American Chemical Society Office of Public Outreach. Production of aluminum metal by electrochemistry (PDF). American Chemical Society. 1997. 
  81. ^ Drozdov 2007,第56页.
  82. ^ Drozdov 2007,第55–59页.
  83. ^ Alusuisse. Historisches Lexikon der Schweiz. 2013 [2017-11-26]. (原始内容存档于2017-10-27) (German). 
  84. ^ Aluminium history. The History of Aluminium. RUSAL. [2018-12-19]. (原始内容存档于2017-09-27). 
  85. ^ Sheller, Mimi. Aluminum Dreams: The Making of Light Modernity. MIT Press. 2014: 41. ISBN 978-0-262-02682-6. 
  86. ^ Drozdov 2007,第60–61页.
  87. ^ Skrabec 2017,第37–42页.
  88. ^ Skrabec 2017,第52–55页.
  89. ^ Drozdov 2007,第61页.
  90. ^ McNeil 2002,第108页.
  91. ^ Skrabec 2017,第42页.
  92. ^ Drozdov 2007,第59–61页.
  93. ^ Drozdov 2007,第55页.
  94. ^ 94.0 94.1 Habashi, Fathi, A Hundred Years of the Bayer Process for Alumina Production, Donaldson, Don; Raahauge, Benny E. (编), Essential Readings in Light Metals, Springer International Publishing: 85–93, 2016, ISBN 9783319485744, doi:10.1007/978-3-319-48176-0_12 (英语) 
  95. ^ Drozdov 2007,第74页.
  96. ^ Hanners, Richard. Ubiquity and antiquity (PDF). From Superstar to Superfund. [2019-06-15]. 
  97. ^ 97.0 97.1 Regelsberger, Friedrich F. Chemische Technologie der Leichtmetalle und ihrer Legierungen [Chemical technologies of light metals and their impurities]. Springer-Verlag. 2013: 13. ISBN 978-3-662-34128-5 (德语). 
  98. ^ 98.0 98.1 98.2 Aluminium history. All about aluminium. RUSAL. [2017-11-10]. (原始内容存档于2017-11-07). 
  99. ^ Ryzhkov, N. I.; Kumanev, G. A. Food and other strategic delivery to the Soviet Union on the "Lend-Lease" (PDF). Proceedings of the International Scientific-Practical Conference "Cooperation of the Anti-Hitler Coalition - an Important Factor in World War II (the 70th Anniversary of the Opening of the Second Front)": 116. 2014 [2019-12-29]. 
  100. ^ Drozdov 2007,第64–69页.
  101. ^ Drozdov 2007,第66–69页.
  102. ^ 102.0 102.1 102.2 102.3 102.4 102.5 Schlesinger, Mark E. Aluminum Recycling 2. CRC Press. 2013: 2–6. ISBN 978-1-4665-7025-2. 
  103. ^ Wallace, G. Production of secondary aluminium. Lumley, Roger (编). Fundamentals of Aluminium Metallurgy: Production, Processing and Applications. Elsevier Science. 2010: 70. ISBN 978-0-85709-025-6. 
  104. ^ 104.00 104.01 104.02 104.03 104.04 104.05 104.06 104.07 104.08 104.09 104.10 104.11 104.12 104.13 Aluminum. Supply-Demand Statistics. Historical Statistics for Mineral Commodities in the United States (报告). United States Geological Survey. 2017 [2017-11-10]. (原始内容存档于2018-03-08) (英语). 
  105. ^ Ingulstad, Mats. 'We Want Aluminum, No Excuses': Business-Government Relations in the American Aluminum Industry, 1917–1957. Ingulstad, Mats; Frøland, Hans Otto (编). From Warfare to Welfare: Business-Government Relations in the Aluminium Industry. akademika publishing. 2012: 33–68. ISBN 978-82-321-0049-1. 
  106. ^ 106.0 106.1 106.2 Aluminium in transport. All about aluminium. RUSAL. [2017-11-26]. (原始内容存档于2017-12-01). 
  107. ^ McDaniel, Joe W. 1903 Wright Engine. Wright Brothers Aeroplane Company. [2019-06-16]. 
  108. ^ Skrabec 2017,第79页.
  109. ^ Drozdov 2007,第69–70页.
  110. ^ Drozdov 2007,第165–166页.
  111. ^ Drozdov 2007,第85页.
  112. ^ 112.0 112.1 Thorsheim, Peter. Waste into Weapons. Cambridge University Press. 2015: 66–69. ISBN 978-1-107-09935-7. 
  113. ^ Seldes, George. Facts and Fascism 5. In Fact, Inc. 1943: 261. 
  114. ^ Skrabec 2017,第134–135页.
  115. ^ Davis, Brian L. The German Home Front 1939–45. Bloomsbury Publishing. 2012: 31. ISBN 978-1-78096-806-3. 
  116. ^ Sokolov, Boris V. The role of lend‐lease in Soviet military efforts, 1941–1945. The Journal of Slavic Military Studies. 2007, 7 (3): 567–586. ISSN 1351-8046. doi:10.1080/13518049408430160. 
  117. ^ Chandonnet, Fern. Alaska at War, 1941–1945: The Forgotten War Remembered. University of Alaska Press. 2007: 338. ISBN 978-1-60223-135-1. 
  118. ^ Weeks, Albert Loren. Russia's Life-saver: Lend-lease Aid to the U.S.S.R. in World War II. Lexington Books. 2004: 135. ISBN 978-0-7391-0736-2. 
  119. ^ Copper. Supply-Demand Statistics. Historical Statistics for Mineral Commodities in the United States (报告). United States Geological Survey. 2017 [2019-06-04]. (原始内容存档于2018-03-08) (英语). 
  120. ^ Gregersen, Erik. Copper. Encyclopedia Britannica. [2019-06-04] (英语). 
  121. ^ Drozdov 2007,第203页.
  122. ^ Drozdov 2007,第135页.
  123. ^ The Evolution of Aluminum Conductors Used for Building Wire and Cable (PDF) (报告). National Electrical Manufacturers Association. 2012 [2017-11-26]. (原始内容存档 (PDF)于2016-10-10). 
  124. ^ Nappi 2013,第5页.
  125. ^ Nappi 2013,第6页.
  126. ^ 126.0 126.1 126.2 Nappi 2013,第9页.
  127. ^ Bockris, John. Comprehensive Treatise of Electrochemistry: Electrochemical Processing. Springer Science & Business Media. 2013: 303. ISBN 9781468437850 (英语). 
  128. ^ United States Environmental Protection Agency. The Cost of Clean Air. United States Government Printing Office. 1973: IE-87. 
  129. ^ Nappi 2013,第12–13页.
  130. ^ Nappi 2013,第9–10页.
  131. ^ Nappi 2013,第7页.
  132. ^ Nappi 2013,第3页.
  133. ^ Nappi 2013,第10页.
  134. ^ Nappi 2013,第14–15页.
  135. ^ Nappi 2013,第17页.
  136. ^ Nappi 2013,第20页.
  137. ^ Nappi 2013,第22页.
  138. ^ 138.0 138.1 Nappi 2013,第23页.
  139. ^ Nappi 2013,第15页.
  140. ^ United Nations Environment Programme. Report card: Aluminium. Class of 2006: Industry Report Cards on Environment and Social Responsibility. UNEP/Earthprint. 2006: 69. ISBN 978-92-807-2713-5. 

Bibliography

[编辑]