User:Arulilipopo/Seifert表面

维基百科,自由的百科全书
由一组三不互扣环界定的 Seifert 曲面。

数学中, Seifert表(以德国数学家Herbert Seifert命名[1] [2] )是一个可定向曲面,其边界是给定的纽结或链接。

此类表面可用于研究相关纽结或链接的属性。例如,许多纽结是否相同(纽结同论)可以使用 Seifert 曲面判断。 Seifert曲面本身也很有趣, 有许多研究围绕它们展开。

该表面的定义如下: 令L三维欧几里得空间(或三维球体)中的驯服可定向结或链接。 由L生成的Seifert表面 S 是一个嵌入在三维空间中的紧凑连通可定向曲面S的边界为L ,使得L上的选定的方向恰好是S边界上的方向。

请注意,在此定义下, 三维欧几里德空间中任何具有非空边界的紧凑、连通、可定向曲面都是由其边界产生的Seifert表面。单个纽结或链接可以生成许多不同的不等价 Seifert表面。 Seifert表面必然是可定向的。但是Seifert表面也能与未定向或不可定向的结关联起来。

例子和反例[编辑]

Hopf 链接的 Seifert 表面。这是一个环面,并不是莫比乌斯带。它有两个半扭转,因此可以定向。

标准的莫比乌斯带具有边界, 其边界线是平凡结。但因为平凡结不可定向, 所以莫比乌斯带并不是 Seifert 表面。

通过给三叶结的常用投影进行“棋盘”着色, 我们可以生成具有三个“半扭曲”的莫比乌斯带表面。因为三叶结不可定向, 所以和之前的例子一样, 生成的表面并不是 Seifert 表面。

存在性和 Seifert 矩阵[编辑]

定理: 任何链接总是有一个关联的 Seifert 表面。

该定理由 Frankl 和列夫·庞特里亚金于 1930 年首次发表[3] Herbert Seifert于 1934 年发表了一个不同的证明,该证明依赖于现在的 Seifert 算法。该算法可以通过给定的相关结或链接的投影来生成 Seifert 表面

目前中文维基百科的链接界面尚且缺失, 为了不影响阅读, 在此简单地说明一下: 一个链接(link)是由若干个纽结互相缠绕组成的。

假设该链接有m 个组件(对于纽结, m = 1 ),该图有d 个交叉点,并且解析交叉点(保留结的方向)会产生f个圆。然后是表面f 个不相交的圆盘通过附加d个带构造而成。同源群是有个生成元的可交换自由群


的亏格。的交叉形式Q斜对称的,可以用 2 g 生成元作为基来表示: , . Q等于下面这个矩阵的g 个副本的直和

解析失败 (未知函数“\timtes”): {\displaystyle 2g \timtes 2g } 的Seifert矩阵:

其在三维空间中的环绕数 the in (or in the 3-sphere) of ai and the "pushoff" of aj in the positive direction of . More precisely, recalling that Seifert surfaces are bicollared, meaning that we can extend the embedding of to an embedding of , given some representative loop which is homology generator in the interior of , the positive pushout is and the negative pushout is .[4]

With this, we have

where V = (v(j, i)) the transpose matrix. Every integer 2g × 2g matrix with arises as the Seifert matrix of a knot with genus g Seifert surface.

The Alexander polynomial is computed from the Seifert matrix by which is a polynomial of degree at most 2g in the indeterminate The Alexander polynomial is independent of the choice of Seifert surface and is an invariant of the knot or link.

The signature of a knot is the signature of the symmetric Seifert matrix It is again an invariant of the knot or link.


结的亏格[编辑]

Seifert 曲面完全不是唯一的:亏格为 g 的 Seifert 表面S 和相对应的 Seifert 矩阵V 可以通过割补理论进行修改,得到亏格 为 g + 1 的 Seifert 表面S ′和新的Seifert 矩阵:

  1. ^ Seifert, H. Über das Geschlecht von Knoten 110 (1): 571–592. 1934. S2CID 122221512. doi:10.1007/BF01448044 (德语). 
  2. ^ van Wijk, Jarke J.; Cohen, Arjeh M. Visualization of Seifert Surfaces. IEEE Transactions on Visualization and Computer Graphics. 2006, 12 (4): 485–496. PMID 16805258. S2CID 4131932. doi:10.1109/TVCG.2006.83. 
  3. ^ Frankl, F.; Pontrjagin, L. Ein Knotensatz mit Anwendung auf die Dimensionstheorie. Math. Annalen. 1930, 102 (1): 785–789. S2CID 123184354. doi:10.1007/BF01782377 (德语). 
  4. ^ Dale Rolfsen. Knots and Links. (1976), 146-147.

外部链接[编辑]

  • Jack van Wijk的SeifertView 程序可将使用 塞弗特算法构造的结的塞弗特表面可视化。

[[Category:曲面]] [[Category:紐結理論]] [[Category:几何拓扑学]]