用戶:Arulilipopo/Seifert表面

維基百科,自由的百科全書
由一組三不互扣環界定的 Seifert 曲面。

數學中, Seifert表(以德國數學家Herbert Seifert命名[1] [2] )是一個可定向曲面,其邊界是給定的紐結或連結。

此類表面可用於研究相關紐結或連結的屬性。例如,許多紐結是否相同(紐結同論)可以使用 Seifert 曲面判斷。 Seifert曲面本身也很有趣, 有許多研究圍繞它們展開。

該表面的定義如下: 令L三維歐幾里得空間(或三維球體)中的馴服可定向結或連結。 由L生成的Seifert表面 S 是一個嵌入在三維空間中的緊湊連通可定向曲面S的邊界為L ,使得L上的選定的方向恰好是S邊界上的方向。

請注意,在此定義下, 三維歐幾里德空間中任何具有非空邊界的緊湊、連通、可定向曲面都是由其邊界產生的Seifert表面。單個紐結或連結可以生成許多不同的不等價 Seifert表面。 Seifert表面必然是可定向的。但是Seifert表面也能與未定向或不可定向的結關聯起來。

例子和反例[編輯]

Hopf 連結的 Seifert 表面。這是一個環面,並不是莫比烏斯帶。它有兩個半扭轉,因此可以定向。

標準的莫比烏斯帶具有邊界, 其邊界線是平凡結。但因為平凡結不可定向, 所以莫比烏斯帶並不是 Seifert 表面。

通過給三葉結的常用投影進行「棋盤」着色, 我們可以生成具有三個「半扭曲」的莫比烏斯帶表面。因為三葉結不可定向, 所以和之前的例子一樣, 生成的表面並不是 Seifert 表面。

存在性和 Seifert 矩陣[編輯]

定理: 任何連結總是有一個關聯的 Seifert 表面。

該定理由 Frankl 和列夫·龐特里亞金於 1930 年首次發表[3] Herbert Seifert於 1934 年發表了一個不同的證明,該證明依賴於現在的 Seifert 算法。該算法可以通過給定的相關結或連結的投影來生成 Seifert 表面

目前中文維基百科的連結界面尚且缺失, 為了不影響閱讀, 在此簡單地說明一下: 一個連結(link)是由若干個紐結互相纏繞組成的。

假設該連結有m 個組件(對於紐結, m = 1 ),該圖有d 個交叉點,並且解析交叉點(保留結的方向)會產生f個圓。然後是表面f 個不相交的圓盤通過附加d個帶構造而成。同源群是有個生成元的可交換自由群


的虧格。的交叉形式Q斜對稱的,可以用 2 g 生成元作為基來表示: , . Q等於下面這個矩陣的g 個副本的直和

解析失败 (未知函数“\timtes”): {\displaystyle 2g \timtes 2g } 的Seifert矩陣:

其在三維空間中的環繞數 the in (or in the 3-sphere) of ai and the "pushoff" of aj in the positive direction of . More precisely, recalling that Seifert surfaces are bicollared, meaning that we can extend the embedding of to an embedding of , given some representative loop which is homology generator in the interior of , the positive pushout is and the negative pushout is .[4]

With this, we have

where V = (v(j, i)) the transpose matrix. Every integer 2g × 2g matrix with arises as the Seifert matrix of a knot with genus g Seifert surface.

The Alexander polynomial is computed from the Seifert matrix by which is a polynomial of degree at most 2g in the indeterminate The Alexander polynomial is independent of the choice of Seifert surface and is an invariant of the knot or link.

The signature of a knot is the signature of the symmetric Seifert matrix It is again an invariant of the knot or link.


結的虧格[編輯]

Seifert 曲面完全不是唯一的:虧格為 g 的 Seifert 表面S 和相對應的 Seifert 矩陣V 可以通過割補理論進行修改,得到虧格 為 g + 1 的 Seifert 表面S ′和新的Seifert 矩陣:

  1. ^ Seifert, H. Über das Geschlecht von Knoten 110 (1): 571–592. 1934. S2CID 122221512. doi:10.1007/BF01448044 (德語). 
  2. ^ van Wijk, Jarke J.; Cohen, Arjeh M. Visualization of Seifert Surfaces. IEEE Transactions on Visualization and Computer Graphics. 2006, 12 (4): 485–496. PMID 16805258. S2CID 4131932. doi:10.1109/TVCG.2006.83. 
  3. ^ Frankl, F.; Pontrjagin, L. Ein Knotensatz mit Anwendung auf die Dimensionstheorie. Math. Annalen. 1930, 102 (1): 785–789. S2CID 123184354. doi:10.1007/BF01782377 (德語). 
  4. ^ Dale Rolfsen. Knots and Links. (1976), 146-147.

外部連結[編輯]

  • Jack van Wijk的SeifertView 程序可將使用 塞弗特算法構造的結的塞弗特表面可視化。

[[Category:曲面]] [[Category:紐結理論]] [[Category:几何拓扑学]]